Reparaturschellen für PE-, PVC- und UPVC-HDPE-Rohrbiegeverbindungen

Basisinformation.

Modell Nr.	DN63
Transportpaket	Kartonschachtel
Spezifikation	DN63
Warenzeichen	GROSSE MAUER
Herkunft	China
HS-Code	7307290000

Produktbeschreibung

UPVC-Reparaturklemmen

1. Slips:
* Anzug für die Notfallreparatur von undichten Rohren unter Druck
* Betriebsdruck: PN10/PN16
2. Eigenschaften:
* Geeignet für PE-, PVC-, UPVC- und HDPE-Rohre
* Geeignet für gerade Rohre, Stumpfschweißverbindungen, Muffenschweißverbindungen, Biegeverbindungen und T-Verbindungen
* Quickfix für undichte Pipeline
* einfache Montage und Demontage
3. Die Größenliste

Seriennummer	Beschreibung		Größe		Druck
			mm	Zoll	Mpa
1	UPVC-Reparaturklemmen	Gerade Fix	DN50	2''	1,0
2	UPVC-Reparaturklemmen	Gerade Fix	DN63	2,5''	1,0
3	UPVC-Reparaturklemmen	Gerade Fix	DN75	3''	1,0
4	UPVC-Reparaturklemmen	Gerade Fix	DN90	3,5''	1,0
5	UPVC-Reparaturklemmen	Gerade Fix	DN110	4,5''	1,0
6	UPVC-Reparaturklemmen	Gerade Fix	DN125	5''	1,0
7	UPVC-Reparaturklemmen	Gerade Fix	DN140	5,5''	1,0
8	UPVC-Reparaturklemmen	Gerade Fix	DN160	6,5''	1,0
9	UPVC-Reparaturklemmen	Gerade Fix	DN180	7''	1,0
10	UPVC-Reparaturklemmen	Gerade Fix	DN200	8''	1,0
11	UPVC-Reparaturklemmen	Gerade Fix	DN225	9''	1,0
12	UPVC-Reparaturklemmen	Gerade Fix	DN250	10''	1,0
13	UPVC-Reparaturklemmen	Gerade Fix	DN280	11''	1,0
14	UPVC-Reparaturklemmen	Gerade Fix	DN315	12,5''	1,0
15	UPVC-Reparaturklemmen	Gerade Fix	DN355	14''	1,0
16	UPVC-Reparaturklemmen	Gerade Fix	DN400	16''	1,0
17	UPVC-Reparaturklemmen	Gerade Fix	DN500	20''	1,0
1	UPVC-Reparaturklemmen	T-Stück-Fix	DN63	2,5''	1,0
2	UPVC-Reparaturklemmen	T-Stück-Fix	DN75	3''	1,0
3	UPVC-Reparaturklemmen	T-Stück-Fix	DN90	3,5''	1,0
4	UPVC-Reparaturklemmen	T-Stück-Fix	DN110	4,5''	1,0
5	UPVC-Reparaturklemmen	T-Stück-Fix	DN160	6,5''	1,0
1	UPVC-Reparaturklemmen	Biegefix	DN63	2,5''	1,0
2	UPVC-Reparaturklemmen	Biegefix	DN75	3''	1,0
3	UPVC-Reparaturklemmen	Biegefix	DN90	3,5''	1,0
4	UPVC-Reparaturklemmen	Biegefix	DN110	4,5''	1,0
5	UPVC-Reparaturklemmen	Biegefix	DN160	6,5''	1,0

4. Projektfälle


5. Hinweise zur Installation: a. UPVC repair clamps is only suit for Butt Fusion Joint and Socket Fusion Joint of Plastic Pipe but it's not suit for Electro Fusion Joint of Plastic Pipe. b. The size and pressure rating of UPVC repair clamps should be match up with the size and pressure rating of leaking pipeline. The pressure rating of UPVC repair clamps is 1.0 Mpa ( 10 bar ) and it is prohibited to use UPVC repair clamps if the operation pressure of your pipeline is above 1.0 Mpa (10 bar ) c. You should check the surface of UPVC repair clamps if there is any crack or damage before installation and the UPVC repair clamps with crack or damage is prohibited to use . d. The pressure of pipeline should be reduced before installation of UPVC repair clamps . e. The oxidizing material and mud on the surface of pipeline should be cleaned before installation and then check the breakage of pipeline and the broken pipeline should be cut off and replaced if it's long and you are not recommended to use UPVC repair clamps for the leaking pipeline with the oversize breakage. f. Put the lubricant ( such as soap water, detergent and etc) on the pipeline surface and rubber gasket of repair clamps for the role of lubrication which is needed for position adjustment of repair clamps during installation process . g. uninstall the vent hole plug of repair clamps and then fix the leaking position with two half bodies of repair clamps and fasten with bolts and nuts in diagonal direction . h. wrap the plug with tape and fix into vent hole of repair clamps i. You should not start the pump until air inside the pipeline exhausted by the exhaust device of pipeline and then restore pipeline pressure when air exhausted .